Carl’s Place HotShot Golf Mat System

$499.95

PIG-HSM-4X5-STD

Carl’s Place’s hitting mat system: a 1¾-inch mat in four sizes with a replaceable 30 × 12-inch hitting strip. Two sizes put the hitting area to one side for a single-handed room; two center it so a right- and a left-handed golfer share the same tee. Choose the size the Space Calculator gives your room, then the strip.

Mat Size 4 × 5 4 × 9 5 × 8 6 × 10

What this size is for

Offset hitting area — the strip sits to one side, for a single handedness. Carl’s publishes 10 ft as the minimum room width for an offset layout. Five feet across the swing.

Hitting Strip Standard (accepts real tees) Foam divot strip Gel divot strip

About this strip

Carl’s three-tee strip, which takes a real tee. The system is priced from this one.

Shipping. Free ground shipping to the lower 48 states and Washington, D.C. Carl’s Place lists this as a manufacturer-direct item: it ships separately from an enclosure kit on the same order, with its own tracking.

Changes and cancellations. Carl’s Place applies a 5% fee to cancel or change a manufacturer-direct item once ordered.

Returns. Carl’s Place accepts returns within 30 days of delivery on items in like-new condition, approved before they ship back; return shipping is the buyer’s. Contact Precision first.

Warranty. Carl’s Place publishes no warranty on its hitting mats. Hitting strips are a wear part and are sold separately for replacement.

Dimensions

Thickness: 1¾″
Hitting strip: 30″ × 12″
Sizes: 4×5 · 4×9 · 5×8 · 6×10 ft
Hitting area: Offset or centered

Sizing

The mat follows the room’s width

Carl’s Place publishes 10 feet as the minimum room width with an offset hitting area and 14 feet for centered play that serves both handednesses. The mat line follows the same fork: the 4 × 5 and 5 × 8 put the strip to one side, the 4 × 9 and 6 × 10 put it in the middle. The long dimension runs across the swing.

4 × 5 ft — offset hitting area. The narrow-room mat.
5 × 8 ft — offset hitting area, with more standing room.
4 × 9 ft — centered hitting area, nine feet across the swing.
6 × 10 ft — centered hitting area, the largest in the line.
Strip. 30″ long × 12″ wide × 1¾″ tall, replaceable without lifting the mat.
Height. 1¾″ — and an overhead launch monitor measures its mounting height from the top of the mat, so every inch here is an inch of ceiling.

All dimensions are Carl’s Place’s own, from the HotShot mat system and hitting strip pages.

The strip

Three strips, one mat

The mat is the same in every case. What changes is the 30 × 12-inch strip the ball sits on, and it is the part that wears.

Standard

Carl’s Place’s three-tee strip, which takes a real tee. The strip the system is priced from; the other two are priced as the difference.

Foam divot

Carl’s Place’s foam-based divot strip. Same 30 × 12-inch footprint as the Standard; Carl’s Place prices it $150 above it.

Gel divot

Carl’s Place’s gel-based divot strip, priced $200 above the Standard. All three are sold on their own for replacement, so the choice is not permanent.

Whose numbers these are

Precision does not manufacture this mat and does not test it. Every dimension on this page is Carl’s Place’s own published figure. Carl’s Place does not publish a weight for the mat sizes, and this page does not estimate one.